Energy efficient engine: Turbine transition duct model technology report

The Low-Pressure Turbine Transition Duct Model Technology Program was directed toward substantiating the aerodynamic definition of a turbine transition duct for the Energy Efficient Engine. This effort was successful in demonstrating an aerodynamically viable compact duct geometry and the performance benefits associated with a low camber low-pressure turbine inlet guide vane. The transition duct design for the flight propulsion system was tested and the pressure loss goal of 0.7 percent was verified. Also, strut fairing pressure distributions, as well as wall pressure coefficients, were in close agreement with analytical predictions. Duct modifications for the integrated core/low spool were also evaluated. The total pressure loss was 1.59 percent. Although the increase in exit area in this design produced higher wall loadings, reflecting a more aggressive aerodynamic design, pressure profiles showed no evidence of flow separation. Overall, the results acquired have provided pertinent design and diagnostic information for the design of a turbine transition duct for both the flight propulsion system and the integrated core/low spool

Cheng Equation: A Revisit Through Symmetry Analysis

The symmetry analysis of the Cheng Equation is performed. The Cheng Equation is reduced to a first-order equation of either Abel's Equations, the analytic solution of which is given in terms of special functions. Moreover, for a particular symmetry the system is reduced to the Riccati Equation or to the linear nonhomogeneous equation of Euler type. Henceforth, the general solution of the Cheng Equation with the use of the Lie theory is discussed, as also the application of Lie symmetries in a generalized Cheng equation.Comment: 10 pages. Accepted for publication in Quaestiones Mathematicae journa

Energy efficient engine: Turbine intermediate case and low-pressure turbine component test hardware detailed design report

A four stage, low pressure turbine component has been designed to power the fan and low pressure compressor system in the Energy Efficient Engine. Designs for a turbine intermediate case and an exit guide vane assembly also have been established. The components incorporate numerous technology features to enhance efficiency, durability, and performance retention. These designs reflect a positive step towards improving engine fuel efficiency on a component level. The aerodynamic and thermal/mechanical designs of the intermediate case and low pressure turbine components are presented and described. An overview of the predicted performance of the various component designs is given

Gender violence in schools: taking the ‘girls-as-victims’ discourse forward

This paper draws attention to the gendered nature of violence in schools. Recent recognition that schools can be violent places has tended to ignore the fact that many such acts originate in unequal and antagonistic gender relations, which are tolerated and ‘normalised’ by everyday school structures and processes. After examining some key concepts and definitions, we provide a brief overview of the scope and various manifestations of gender violence in schools, noting that most research to date has focused on girls as victims of gender violence within a heterosexual context and ignores other forms such as homophobic and girl violence. We then move on to look at a few interventions designed to address gender violence in schools in the developing world and end by highlighting the need for more research and improved understanding of the problem and how it can be addressed

Characterization of solar-grade silicon produced by the SiF4-Na process

A process was developed for producing low cost solar grade silicon by the reaction between SiF4 gas and sodium metal. The results of the characterization of the silicon are presented. These results include impurity levels, electronic properties of the silicon after crystal growth, and the performance of solar photovoltaic cells fabricated from wafers of the single crystals. The efficiency of the solar cells fabricated from semiconductor silicon and SiF4-Na silicon was the same

Intelligent sampling for the measurement of structured surfaces

Uniform sampling in metrology has known drawbacks such as coherent spectral aliasing and a lack of efficiency in terms of measuring time and data storage. The requirement for intelligent sampling strategies has been outlined over recent years, particularly where the measurement of structured surfaces is concerned. Most of the present research on intelligent sampling has focused on dimensional metrology using coordinate-measuring machines with little reported on the area of surface metrology. In the research reported here, potential intelligent sampling strategies for surface topography measurement of structured surfaces are investigated by using numerical simulation and experimental verification. The methods include the jittered uniform method, low-discrepancy pattern sampling and several adaptive methods which originate from computer graphics, coordinate metrology and previous research by the authors. By combining the use of advanced reconstruction methods and feature-based characterization techniques, the measurement performance of the sampling methods is studied using case studies. The advantages, stability and feasibility of these techniques for practical measurements are discussed

Unitary relations in time-dependent harmonic oscillators

For a harmonic oscillator with time-dependent (positive) mass and frequency, an unitary operator is shown to transform the quantum states of the system to those of a harmonic oscillator system of unit mass and time-dependent frequency, as well as operators. For a driven harmonic oscillator, it is also shown that, there are unitary transformations which give the driven system from the system of same mass and frequency without driving force. The transformation for a driven oscillator depends on the solution of classical equation of motion of the driven system. These transformations, thus, give a simple way of finding exact wave functions of a driven harmonic oscillator system, provided the quantum states of the corresponding system of unit mass are given.Comment: Submitted to J. Phys.

Adaptive Resolution Molecular Dynamics Simulation: Changing the Degrees of Freedom on the Fly

We present a new adaptive resolution technique for efficient particle-based multiscale molecular dynamics (MD) simulations. The presented approach is tailor-made for molecular systems where atomistic resolution is required only in spatially localized domains whereas a lower mesoscopic level of detail is sufficient for the rest of the system. Our method allows an on-the-fly interchange between a given molecule's atomic and coarse-grained level of description, enabling us to reach large length and time scales while spatially retaining atomistic details of the system. The new approach is tested on a model system of a liquid of tetrahedral molecules. The simulation box is divided into two regions: one containing only atomistically resolved tetrahedral molecules, the other containing only one particle coarse-grained spherical molecules. The molecules can freely move between the two regions while changing their level of resolution accordingly. The coarse-grained and the atomistically resolved systems have the same statistical properties at the same physical conditions.Comment: 17 pages, 11 figures, 5 table

Novel duplex vapor electrochemical method for silicon solar cells

Progress in the development of low-cost solar arrays is reported. Topics covered include: (1) development of a simplified feed system for the Na used in the Na-SiF4 reactor; (2) production of high purity silicon through the reduction of sodium fluosilicate with sodium metal; (3) the leaching process for recovering silicon from the reaction products of the SiF4-Na reaction; and (4) silicon separation by the melting of the reaction product

Axial Multicentric Osteosarcoma in an English Cocker Spaniel

No abstract available